During fall and winter, few matters are of greater concern than a warm crackling wood-burning fire. A clean and well-maintained chimney is an important part of enjoying one’s fireplace during the cold months. Neglecting the chimney holds several dangers to the home, as well as a number of nagging concerns to the user. In extreme cases, a dirty chimney can lead to a chimney fire, but it can also lead to a slow-drawing chimney that builds up a smoke inside the house. Find out how to accurately decide whether your chimney needs cleaning, and study self-made techniques for cleansing your chimney by yourself. A fireplace soot cleaner can help you in the cleaning of your chimneys.

The flue is the masonry or metal duct that extends from the fireplace up to the top of the chimney. Creosote and soot are brought about by the burning of wood in the fireplace. Gas-burning fireplaces will not have this problem. Burning unseasoned wood can produce creosote, even in the short term. Even burning seasoned wood over time without cleaning the chimney can result in creosote and soot formation. Therefore the cleaning formulas are to take away soot and smoke from the chimney.

Standard Measurements for Chimney’s Cleaning

For easy inspection of your chimney, you need a powerful flashlight, a ladder to get up on the roof, a chimney brush, and a vacuum. You may need to examine the exterior chimney parts first. Ensure that your brush is a suitable size for your chimney. To do this, simply measure the diameter of the chimney liner. If your brush is too big, it could get stuck in your chimney. Chimney brushes that are too small will not be able to exert a suitable amount of pressure on the walls. Always wear protective goggles, dust masks, and gloves.  Cover all your furniture and any carpeted areas around the fireplace. Also, shut off the clean-out door. If you have a fireplace, seal it off.

Clean your Chimney with the Fireplace Soot Cleaner

Harsh chemical cleaners can be used but, they are considered dangerous and pointless options. There are some old-fashioned formulas below for putting off smoke and soot residue from your fireplace and chimney. Yes, these are the fireplace soot cleaners that can clean all the soot easily from the chimneys. Each of the following approaches to cleaning off soot includes using a stiff brush to scrub off the blackened stains. These methods require some good old elbow grease to get the job done:

 

  • How to Clean it?

 

Create a thick consistency of detergent or soap, pumice, warm water, and a small amount of ammonia. Apply the mixture to the chimney and let it dry. Next, rub off the mixture with a web scrub brush to get rid of the sooty mess.

 

  • Cleaning Ingredients

 

Mix one ounce of table salt, one ounce of soap, and enough water to create a creamy mixture. Use a fabric to rub the combination onto the chimney. Next, let the mixture dry for a minimum of 10 minutes. Finally, scrub with a stiff brush.

 

  • Preparation of Mixture

 

Get a bar of naphtha soap and shave it into a pot. Add three quarts of water and apply it to the stove. Bring the mixture to a full boil. After the cleaning soap totally melts, turn off the stove and enable the mixture to cool. Add one pound of pumice and a cup of ammonia. Mix all substances together thoroughly. Apply the solution to the stained surfaces and leave it for at least one hour. Use a stiff bristle brush to rub it off. In this way, you can clean your chimney with the fireplace soot cleaner.

It doesn’t matter which formulation you have used to rinse off the masonry and rinse away the gook with hot water. Apply a detergent to the surface and scrub and then provide it a last warm-water rinse. Also, apply the fireplace soot cleaner mixture on your chimney. Your chimney must be free of the glaring black soot stains.

If you are having any trouble getting a fireplace soot cleaner or to clean your chimney, you can get help from us. You can fill out the form below for a quick resolution of your fireplace soot.